← Products · Brackets
AN-120
Wall bracket
Adjustable 3D bracket for unitised and stick curtain walls on concrete slab edges. Serrated washers lock the position; slotted holes give ±25 mm in all three directions.
Dead load12 kN
Wind load±8 kN
Adjustment±25 mm XYZ
MaterialS355 HDG
FixingCH-38 / M12
Weight2.4 kg
Load table
Characteristic resistance
| Variant | Projection | Dead load NRk | Wind VRk | Edge distance |
|---|---|---|---|---|
| AN-120-100 | 100 mm | 14.0 kN | ±9.5 kN | ≥ 100 mm |
| AN-120-150 | 150 mm | 12.0 kN | ±8.0 kN | ≥ 100 mm |
| AN-120-200 | 200 mm | 9.5 kN | ±6.5 kN | ≥ 125 mm |
| AN-120-250 | 250 mm | 7.5 kN | ±5.0 kN | ≥ 125 mm |
Values for concrete C30/37, uncracked. Design values to be determined with TRAX Calc or by our engineers.
Installation
Four steps on site
Set out
Mark bracket positions from the anchor layout drawing.
Fix
Bolt to the CH-38 channel, torque to 60 Nm.
Adjust
Align ±25 mm in three directions to the survey line.
Lock
Serrated washers locked, position recorded in QA sheet.