Door Robot
Cutting lists, corner joints, thresholds, lock and hinge machining and fabrication sheets for aluminium doors.
In training: the robot is being tested on approved past jobs. Files in this field are processed together with an engineer for now; you can still send one for a demo.
- Input
- DWG / STEP + list
- Target output
- PDF · DWG · XLSX
- Scope
- Frame, leaf, threshold
- Status
- In training
Door fabrication that matches the catalogue
Door fabrication leaves little room for error. Profile cuts, corner joints, threshold and brush details, lock and hinge machining must match the system catalogue exactly.
The Door Robot is being trained on rules compiled from the system suppliers' fabrication catalogues: cut formulae, corner joints, gasket and accessory quantities, machining positions. The target output is the fabrication sheet, cutting list, accessory and gasket quantities, and the work-request and order forms.
What you send, what you get back
Your files come in as they are; the output goes out in the form the workshop, purchasing and site teams use directly.
You send
- DWGDoor drawingElevations and sections; 2D drawing or 3D model.
- XLSXDoor listType, size, quantity, opening direction and hardware choice.
You get
- PDFFabrication sheetElevation, corner joint, machining positions.
- XLSXCutting and quantitiesCutting list, accessory and gasket quantities, forms.
This is what the output looks like
The drawings below come from a fictional demo project. Real client drawings and codes are never shown here.
Send your first file to the robot
Send one assembly, one sheet type or one bid package. We send back the sample output and a quote for the full job.
- 01Your first file is processed free of charge as a sample.
- 02After reviewing the output you get a quote for the full job.
- 03Your files stay confidential and are used for your job only.
- 04We can work with your own title block and layer standard.
Frequently asked questions
When will this robot be ready?
Training means rebuilding approved past jobs with the robot and turning every difference into a rule. When it is ready, the status label on this page changes.
Can I send files already?
Yes. Work in fields still in training is run together with an engineer for now; send your files through the demo form.
Which systems does it work with?
The rules are compiled from the system suppliers' fabrication catalogues. Just tell us which series you use in the form.